In Ajax, sprinkler system blowout process is one of the winterizing operations that your irrigation system is exposed to and preventing freeze damage. To begin the procedure, start by turning off the water line leading to the system and closing the main isolate valve. First of all, in this blowout process, appraise the backflow preventer, open it and the water that is left in the lines will drain. An air pressure system is the next stage, and a high-volume air compressor is connected to the system, each zone is then blown out individually to ensure a clear carpet throughout the pipes, valves, and sprinkler heads. This action has the purpose of stopping water from freezing and pipes breaking in cold temperatures. The technical professionals are very careful and controlled the pressure of the air to avoid any damage to the system. After blowing, all the valves are let open and the controller is put into the “off” or “rain” setting, securing your irrigation system that it is safe afterward and prepared for winter. This service is a professional one that not only ensures protection of your investment but also ensures a successfully run-up in the later part days.