Professional irrigation sprinkler repair and maintenance is a must for system longevity, efficiency, and water conservation in Toronto, and the GTA. The frequent creation of ice in Canadian climates and changing seasons are the two factors that usually lead to the impairment of systems, such as sprinklers, controllers, and pipes online (underground). Such tasks as replacing the pop-up heads are estimated to run about $85; however, the rotors like the Hunter PGP Ultra are commonly $130 each. The spring turn-ons mostly consist of checking the operation of the valves, looking over all zones, controller reprogramming (e.g., Hunter X2 or Hydrawise), and PSI setting up(PSI: 30–50). The use of fall blowouts that are fired by compressors with a capacity of 80–100 CFM will entail flushing the system with air, hence it is also a measure to prevent the pipe bursts caused by freezing. It is also possible to use sensors like Rain/freeze sensors such as the Hunter Mini-Clik and nozzles such as HE-VAN, which could save 20–40% of water annually. Regular inspections can guarantee that the possible causes of water waste have been enumerated properly, thus leaks, blocked nozzles as well as timer issues can be addressed. In some areas of Canada, there are over 100 frost days per year where professional service can instantly ensure the efficient operation of the system for an impressive 15 years, in addition to this, one can be optimistic that the water bylaws established are adhered to.