Outdoor LED Lighting Electrician Near Me
Common Outdoor LED Lighting Electrical Issues
- Light Flickering or Dimming: Usually the loose wire, defective transformers or voltage drops are the reasons for flickering or dim lights.
- Light not turning On: May be due to wiring problems, damaged timers, or defective bulbs.
- Short Circuits: It happens because of the intruding of water, poor installation, or damaged wires.
- Uneven Brightness: This happens due to faulty voltage distribution and using the wrong type of bulb.
- Frequent Burnouts: The reason for this may be low-quality fixtures or wiring problems.
For these problems specifically, our skilled and officially recognized specialists of The Sprinkler Company Inc. are the best. We not only use Kichler products which are of good quality but also make sure all installations are done in accordance with the safety guidelines. To relieve you from your worries, we provide a 3-year warranty on our works. Let our specialists make your outdoor LED lighting always reliable, energy-saving, and miraculously beautiful. To get expert solutions, ask us how!
Lighting Installation Cost Calculator
Why Choose Us Among Landscape LED Lighting Companies Near Me?
Warranty
Sprinkler Company Inc. is proud to announce a 3-year warranty for all the mentioned products like Kichler transformers, fixtures, and wiring that will be replaced, if necessary. Transformers, fixtures, wiring) will be covered by warranty, and the products are stated to be free from physical damage. Our products which are companies the best and the ones which are as much green as they are genuine and also will make sure that your lighting installation is one of the stoutest to outlast for quite a while is what we present to the market.
Economical
These accomplishments and practical places will be the results of the outdoors through the installation of energy-efficient 12-watt light systems. The value of these lights lies in the fact that, even though their current consumption is low, they can nevertheless produce the effect of high brightness and thus, less energy is needed, in turn, you will not have to pay more for the electricity. Over their long life along with simple mounting, all kinds of backyard lights will be a spectacular sight and always remain in good condition irrespective of the efficiency of the lights as well as the artistry of the homeowner.
Efficiency
Our LED lights are power-efficient, and thus, they take only 25% energy of the old technology. It will not only limit the usage of energy hence cutting down the electricity bill but also lead to the elimination of carbon emissions which are the essential things of green power. For instance, outer lightings will be beautiful since our products are green and in addition, you will be able to make environmental decisions that are very impactful. Apart from energy conservation, our lighting products like cool designs are also very bright allowing you to smart your landscaping better.
Durability
Some Outdoor LED Lighting Electrician Near Me may use non-original materials, such as using the same materials over and over again, and as a result durability is a compromised point in this case. At The Sprinkler Company Inc, we cut deals with firms that are Kichler and Unique from the United States, and, thus, our only supplier of equipment is exclusively American. Exceptional lighting design is not the only way we prove our skills’ efficiency as it is mostly the longevity of our performance, which can last up to ten years and longer.
- Secure Connections: Make sure all the connections in the system are tightly held and do not have any dust or rust or show wearing out signs. Loose or frayed ones can result in flickering or dimming of the light.
- Substitute Damaged Transformers: Check the transformer if it shows any sign of the problem or malfunction. If it is not working correctly due to the low power supply you should replace it with a new one that is compatible with your system's requirements.
- Voltage Loss Solutions: One suitable gauge of wires should be used to maintain a low level of voltage drop in long cables. Let the power source be the appropriate size for the correct number of lights in the system.
- Check the Wiring: Look over all the wires and see if there is any wear or tear, loose connection, or break in them. Tighten or replace the wires that are causing trouble.
- Replace Damaged Timers: The timer could possibly be the cause, if it is not working, due to which the lights are not coming on. Change the damaged timer to a good one to bring back the normal operation.
- Swap Defective Bulbs: Try out each of the bulbs and discover any that are dead or have glitches and change them to bright, high-quality LEDs that are suitable.
- Inspect for Water Intrusion: Inspect all the connections and fixtures to make sure that there is no water penetration. Use waterproof tape and sealant to give moisture same wires the protection they need.
- Ensure Proper Installation: Ensure that the cupolas are appropriately wired and there is no danger of unintentional exposure or degrading wires.
- Replace Damaged Wires: The ones that are all mangled, or hanging by a few filaments are easy to spot, so, cut those and get brand new ones as a matter of necessity.
- Test with a Multimeter: The tool will be used to search for short circuits and to find the problem in the system.
- Check Voltage Levels: Ensure that the transformer is outputting the correct voltage according to the total wattage of the system. If the voltage is not enough or the voltage is too high, speed up or slow down the transformer respectively.
- Replace Mismatched Bulbs: Guarantee that not a single system bulb is less or more than the required wattage and type to maintain uniform bright levels of each bulb.
- Inspect and Replace Faulty Wiring: Make sure no wires are worn out or bruised thus resulting in poor power distribution.