To winterize your irrigation system in Muskoka, it’s essential to follow all the directions thoroughly to protect it against freezing temperatures. Begin by turning off the main water supply and thus ensure that the system will not have any flow at all. The following step should be draining the backflow preventer and it is the most significant measure for keeping the component undamaged after the frost has gone. Open all drain valves and release the water in the pipes; one bladder that is filled with water may cause cracks if it is left frozen. With the air compressor, zone by zone, blow out any remaining water to ensure complete drainage. After that, check all the valves for leaks, secure them and turn off the controller to prevent it from being accidentally operated even in winter. Lastly, cover away any pipes or backflow preventers that are in direct contact with air from the outside with something like polyethylene that can shield them from Muskoka’s harsh cold. By following all these steps, your irrigation system will be in good condition, which means that no repairs will be needed and it will be ready for the next season.