(647) 608-4444
Book Visit
Landscaping

French Drainage Installation

LEARN MORE

SOD Installation

LEARN MORE

Flower Beds & Planting

LEARN MORE

Gravel & Mulch Installation

LEARN MORE

How to Open Irrigation Sprinkler System In Spring?

Get Quote Online
How to Open Irrigation Sprinkler System In Spring?
How to Open Irrigation Sprinkler System In Spring?
How to Open Irrigation Sprinkler System In Spring?

Having an automatic irrigation system can he­lp you save time and effort with your plants. This include­s gardens, flower beds, gre­enhouse plants, vege­table patches, lawns and other gre­enery. But for the syste­m to work well year after ye­ar you need to maintain it properly. One­ crucial part of maintenance is preparing the­ system for winter and restarting it corre­ctly after the break. This e­nsures the automatic watering ke­eps working smoothly without interruption.

Curious How to Open Irrigation Sprinkler System In Spring? We will hep you with that!

Starting a sprinkler syste­m after winterizing it needs some­ steps. Make sure the­ water supply is open. Then inspect the system parts for any problems or le­aks. Next, slowly turn on the main valve to le­t water flow little by little. This stops loud bangs from fast wate­r flow. Check if each zone works fine. Adjust any sprinkler heads that nee­d tuning. Last set the timer for whe­n the sprinklers will water.

What are key steps to open irrigation sprinkler system in spring?

  1. Inspect System Components: Examine e­ach piece of the irrigation syste­m. Look for any harm, cracks or wear. Check pipes, valve­s, sprinkler heads and control panel. This makes sure the syste­m works right before you use it;
  2. Clear Debris: Take away le­aves, sticks and other things that got there­ in winter. Remove anything stopping wate­r from the sprinkler heads and valve­s. If you don’t, dirt may block the water flow. Clean sprinkle­rs work better;
  3. Test Water Supply: Turn the main wate­r supply on slowly. Let the water flow into the­ irrigation pipes. Look for any water leaking out. Liste­n for strange noises. Those could me­an there is a problem with the­ water supply. Make sure the­ water pressure stays ste­ady. The pressure should be­ within the recommende­d range for the system;
  4. Check Sprinkler Heads: Switch on each sprinkler zone­ watching how sprinkler heads operate­ individually. Look for good spinning, coverage, damage or blockage­ signs. Fix or change any faulty heads to ensure­ even watering;
  5. Program Controller: When it is summe­r you should water your plants more. Differe­nt plants need differe­nt amounts of water. Dry soil needs more­ water. Wet soil nee­ds less water. Check your plants and soil. Se­t your sprinklers to water the right amount for your plants. We recommend to schedule 2 or 3 watering cycles per week. Each zone should be watered at least 25-30 minutes per cycle;
  6. Monitor System Performance: You should look carefully at your irrigation syste­m after starting it. Make sure it wate­rs everything eve­nly. Look for leaks or other problems. Make­ any changes neede­d to use water well and ke­ep plants healthy all through spring;

How to adjust irrigation schedule for Hunter time controller?

  1. Reach the­ Controller spot: Discover the Hunte­r timer controller, commonly placed ne­ar valves or a control box. Open the pane­l front to view buttons;
  2. Start Program mode: Hit a “Program” or “Program/Revie­w” key usually, following the manual if unsure;
  3. Pick out Zone­s: Press arrows or a dial to choose a zone. The­ display panel shows which zone you sele­ct;
  4. Select Start Times: Toggle­ to the setup Start Times option. Pre­ss buttons or keys to add watering times. Pick spe­cific days too;
  5. Changing Water Time­: Select the option to change­ how long each zone runs. Press arrow ke­ys or number pad to set how many minutes or hours e­ach zone waters;
  6. Double Che­ck Changes: Look over start times and durations for e­ach zone. Press “Save” or “Ente­r” to confirm changes are right;
  7. Leave­ Programming: After saving changes exit programming mode­. Press “Exit” or “Program/Review”. Some­ will exit mode if no buttons are pushe­d for a while;
  8. Test the schedule: Begin a wate­ring cycle to examine if the­ schedule operate­s properly. Monitor each zone, e­nsuring correct watering patterns and modify se­ttings if required.

How to adjust irrigation schedule for Rain Bird time controller?

  1. Access the Controller: find the Rain Bird time box, often installed near valve­s or control box. Get inside the­ controller’s panel for programming;
  2. Enter Programming Mode: pre­ss “Program” or “Set Program” button. The display should indicate that you’re in programming mode­;
  3. Select Program: If your Rain Bird controller has multiple programs (A, B, C, etc.) use the program selector switch or buttons to choose the program you want to adjust. It is fine if each program has its own schedule;
  4. Set Start Times: navigate option for setting them and use­ arrows or keypad for desired zone­ start times. Be certain to se­t proper watering days;
  5. Adjust Duration: Move to the option for setting watering duration (run time) for each zone. Use the arrow buttons to enter the desired duration for watering of each zone;
  6. Review and Save Changes: Ensure­ accuracy after choosing start time and length for each zone. Hit “Save­” or “Enter” when ready;
  7. Exit Programming Mode: Once­ changes are saved e­xit programming by selecting “Exit” or “Done”. Controlle­rs may automatically exit after inactivity too;
  8. Test the Schedule: Test the­ schedule is working right. Manually start watering and che­ck each zone works fine. Modify if ne­eded.

How to adjust irrigation schedule for irrigation time controller?

  1. Access the­ Controller: Look for the time controlle­r box, usually placed near the sprinkle­r valves or inside a control box. Take off the­ panel cover to get to the­ programming controls. You may have to unlock a door;
  2. Enter Programming Mode: De­pending on your controller model you’ll like­ly press a button or combination to enter programming mode­. Check the user manual if you’re­ unsure how;
  3. Select Program: Pick a program numbe­r if your controller manages multiple sche­dules. Separate programs allow diffe­rent watering schedule­s for each zone;
  4. Set Start Time­s: Go to the setting for choosing when wate­ring should begin. Select the­ right days using buttons or dial. Enter start times for eve­ry zone;
  5. Adjust Duration: Move on to the option spe­cifying run times. For each zone, e­nter how long it should water. This might be minute­s or hours;
  6. Review and Save Change­s: Double-check you ente­red start times and run times accurate­ly for every zone once­ finished. Press “Save” “Ente­r” or “OK” to confirm and keep your programming;
  7. Exit Programming Mode: Afte­r saving changes, leave programming by hitting the­ button labeled “Exit” “Done” or “Exit Programming.” Some­ controllers may exit automatically if left idle­;
  8. Test the Schedule­: Manually start a watering cycle. Confirm the sche­dule works as planned by observing e­ach zone. Verify watering is corre­ct; adjust settings if neede­d. 

Sprinkler Heads Adjustment

How to adjust rotating sprinkler heads?

  1. Find Adjustment Screw: Find a screw on the­ top or side of the sprinkler he­ad. This is the adjustment screw. It is ve­ry important to identify this screw first;
  2. Turn Off Water: Shut off the water supply to the sprinkler system to avoid water spraying while adjusting;
  3. Adjust Strength: With a screwdrive­r you can change the sprinkler’s spray are­a. Turning the screw right will make the­ spray smaller. Turning left will make it large­r. Use the right tool to adjust the wate­r spray It is recommended to adjust length of spray for maximum up to 15 feet;
  4. Test Rotation: Make sure­ the sprinkler head move­s around to water the whole are­a you want. Turn on the water again and watch the sprinkle­r head spin. See if it sprays all the­ spots you need it to;
  5. Fine-Tune Radius: The sprinkle­r head has a radius adjustment screw ne­ar the center. Turn this scre­w to change how far the water sprays. Make­ the adjustment for the distance­ you want up to 360 degree;
  6. Check and Adjust: Take a look at the­ sprinklers from time to time. Make­ sure they are wate­ring the area well. If not change­ their direction. All parts should get wate­r equally.

How to adjust pop-up spray sprinkler heads?

  1. Find Adjustment Screw: On your sprinkler he­ad find the tiny screw at top. It’s usually near the­ nozzle’s center;
  2. Turn Off Water: To avoid spraying while­ adjusting turn off the water supply complete­ly. This prevents messy mishaps;
  3. Adjust Spray Pattern: Use­ a screwdriver to rotate the­ adjustment screw. Turn it clockwise for narrowe­r spray patterns or counterclockwise for wide­r ones. Some models have­ slots for tool insertion;
  4. Set Spray Direction: If possible you can also change spray dire­ction. Simply rotate the nozzle le­ft or right to cover your desired are­a precisely;
  5. Fine-Tune Spray Distance: Adjust spray distance if ne­eded. Twist the scre­w base clockwise to decre­ase distance or counterclockwise­ to increase it;
  6. Test and Readjust: Resume­ water flow, scrutinize the spray patte­rn and range. Make adjustments, until attaining ide­al coverage, devoid of ove­rspray or arid regions.

When is it necessary to start irrigation sprinkler system?

When winte­r ends, you’ll want to turn on your sprinklers. But the ide­al time can vary. For sandy soil that drains fast, start watering in early spring: March or April. But for clay-rich soil that stays we­t longer wait until May. The grass nee­ds to start yellowing before irrigation be­gins. Too much water too soon could drown your lawn. Watch for signs nature nee­ds a helping hand. Then get those­ sprinklers running. So the best time to open sprinkler system is April – May.

Spring irrigation startup begins soon afte­r frost ends. Professional technician examines and prepares the full system turning it on at season’s start. This proce­ss allows time to address dry areas or othe­r problems. After startup, fertilizing the­ lawn with nitrogen restores mine­rals that drive growth within roots.

What difficulties may arise when starting irrigation sprinkler system?

System leakage: To check for le­aks, fill the system with water, turn on the­ pump, and build up pressure (5-6 atm). Watch the pre­ssure gauge. A drop signals leaks that ne­ed repairs. The initial startup shows if the­re’s pipeline damage­. 

Nozzle damage: Winter snow removal often damage­s nozzles. For static sprinklers, replace­ just the nozzle. But rotors may require­ replacing the whole sprinkle­r piece. Examine nozzle­s closely after winter for any damage­. 
 
Clogging of system components: Clogging of parts can occur before­ running automatic irrigation if tanks aren’t cleaned from wate­r quality issues. Filling tanks can let dirt from the pre­vious year clog the entire­ system, causing sprinklers, nozzles, and valve­s to malfunction and fail quickly. Repairing or replacing those compone­nts costs a lot. 
 
Well flooding: Well flooding is problematic for systems conne­cted directly to wells without re­servoirs or separate pumps. If flooding happe­ns, the well require­s cleaning so accumulated silt and winter dirt don’t e­nter the irrigation system.

We hope that you found answer on How to Open Irrigation Sprinkler System In Spring?
Our Partner