The Sprinkler Company Inc. / Controllers and equipment
HC Flow Meter Winterization: Removal and Storage Planning
HC flow meter winterization needs device-specific planning. Tell the contractor that the meter is installed and share its location before the visit, so it can be included in the agreed work.
Identify the meter for HC flow meter winterization
Photograph the accessible model label and installation from a safe position. A physical HC meter in the pipe is different from a flow reading displayed in an app. The device location and plumbing arrangement help the contractor assess the job, so send those details rather than only a screen capture.
Discuss Hunter's guidance with the technician
Hunter describes temporarily bypassing the HC meter if the blowout route would otherwise pass through it. Its valve-bypass guidance also addresses removal to prevent water remaining in the meter. These are instructions for the identified device. Have the professional plan the work instead of improvising a bypass from this article.
Reference: Hunter: Winterizing and Removing the HC Flow Meter
Record where removed parts go
If the agreed service includes removing the meter, keep its identification and storage location in the closing notes. Also ask who will reinstall it in spring. An online controller display does not prove that a removed meter is back in place, so use the actual service record.
Questions and answers
Common questions
Does this apply to every flow-meter brand?
No. Other devices require their own manufacturer instructions.
Can I leave a removed part unlabelled?
Label and record it so the correct component can be identified at reinstallation.
Request irrigation closing
Call us with your address, known zone count and any access questions. We can discuss the work and confirm an available appointment.
Equipment references: Hunter: Winterizing and Removing the HC Flow Meter
Use the instructions for the installed equipment. This guide does not replace an on-site assessment.
The Sprinkler Company Inc.