Sprinkler System Service
The Sprinkler Company Inc. is one of the most prominent names in the field of irrigation servicer in Vaughan, Ontario. With a tremendous 15 years of practical experience, they present themselves so excellently that their accomplishments were so praised. They operate in areas beyond Toronto, such as Vaughan, Richmond Hill, Oshawa, and Oakville, The Sprinkler Company Inc, etc. The fully capable and trusted name for the irrigation needs of the residential area not only of Toronto but also of nearby areas is The Sprinkler Company Inc. The Sprinkler Company Inc is dedicated to making unique solutions guarantees that practical and functional sprinkler systems tailored to each individual’s needs are created. The Sprinkler Company Inc has 5.0-star rating on Google and 99% customer satisfaction have earned them our place as the top company in the field.
Tools for Sprinkler System Service
You will need a new sprinkler head, a cutting tool or shovels, needle-nose pliers, screwdrivers, cork tape, and a container to fill the hole for the restoration work.
Steps to Repair a Broken or Damaged Sprinkler Head
- Shut off the water supply to avoid the water coming out of the pipe during the mending process.
- Cautiously dig around the rusted crumbled sprinkler head with a shovel or trowel, as there is not much space available, the sand that was removed is being put in a bucket.
- Take off the faulty head that is found from the riser or pipe using the pliers and confirm if there is dirt or any other thing inside the riser, then clean it if such is the case.
- Give a little twist to the Teflon tape around the threads of the riser apart from that of riser to ensure that there is no way for the water to come out. Set the new sprinkler head just on the riser by screwing it yourself. The screws should not be over-tightened and the sprinkler should be secured.
- Set the head in the right place and up to the ground. Also, reglue the new nozzle orifice and adjust the spray pattern and distance according to the manufacturer’s instructions.
- Turn on the water supply and check whether the new sprinkler head works and spreads the intended area. Check for leaks.
- Replace the hole with the soil around the sprinkler head and make sure the head remains upright and at the right height.
How to Fix a Clogged Sprinkler Head
- Cut the water off in order to close out the system.
- Take out the blocked sprinkler head from the riser.
- Release the filter from the head and let it to run under a running machine to remove the dirt. Use a very small brush or wires to clean the nozzle and the spray holes.
- Switch the irrigation system for a short period without the head to sweep out the rest of the debris in the pipes.
- Fix the new head to the riser and check the operation and make sure that all is good.
EXCELLENT Based on 115 reviews Konstantin Gariaev2024-08-09 We installed a sprinkler system with the company about 6 years ago. Still working as it was after the installation. No it a single problem. We call the company every year in fall to help us properly close the system for the winter. Recently, we had some work done on the front yard and the power cable got cut. The guys who were doing the work didn't tell us or they didn't know. I was concerned it would take a while to find the problem. I called the company and they found and fixed the problem within an hour. I am very happy with the service. Highly recommend. Robert Crocione2024-08-08 Switched to The Sprinkler Co from a what I thought was good Company looking after my irrigation system I was wrong. The Sprinkler Company is proactive and always available within fairly short period of time to address any issues that I have and their staff is top notch and trustworthy. They don’t try to oversell you which I appreciate, highly recommended! June Evangelista2024-08-08 Professional and efficient and always ensure that service maintenance is provided. Stephen Dugal2024-08-03 Excellent servive and advise Rob Peck2024-08-02 Excellent, fast, courteous, personable service. John2024-08-01 The crew came in the morning ready and prepared to complete the the sprinkler install. They were very coordinated our home was left the way they found it, the team leader explained in detail how to use the the sprinkler system and tested all the zones on a walk through with me. Cameron Eby2024-08-01 This company is extremely professional. Responsive, knowledgeable and kind. It's an excellent choice! Thomas Phillips2024-07-31 The Sprinkler Company and their staff are great. They designed, installed and maintain our system Highly recommend
How to adjust sprinkler heads?
Step 2: Turn On the Water Supply: Furthermore, let your sprinkler system be operational in order to watch the current spray pattern. By observing the water distribution, you can see any spots that may be overwatered or underwatered. This visual inspection is absolutely necessary in order to precisely determine where the adjustments are needed. Just as we can watch the water flow and find out which nozzles need adjustment as well as whether they effectively cover intended areas, others can.
Step 4: Check for Proper Coverage:Â After doing some initial corrections, verify if the coverage was properly done. Watch the sprinkler heads that are effectively watering the desired areas without creating dry spots or overwatering certain zones. Modify the heads as deemed necessary to create homogeneous heding of the yard or garden. Base the high-quality efficiency on head-to-head coverage. It means that the spray coming from one head should reach the other head and thus, all the areas will be equally watered. Do not overspray the water to the streets, driveways, or buildings in order to avoid water waste.
Step 5: Fine-Tune and Maintain: Watch every part of the sprinkler throughout the watering cycle to be sure the right adjustments gave the needed coverage. Make small moves to the system to adjust it properly if more adaptation is needed. When the device is configured to your requirements, track down all screws and control devices. Timeously check the sprinkler heads to make sure they are in working condition. Clear them of dirt and any other things to prevent blocking and thus reliable performance. particularly, it is needful to examine and reset the heads at the beginning of the watering season or after you have changed the landscape. Â
How Much Does Irrigation Sprinklers Service Cost in GTA?
In the Greater Toronto Area (GTA), irrigation sprinkler services typically range from $125 to $430. This includes maintenance visits costing between $80 and $150, comprehensive system check-ups around $90, and repairs like replacing sprinkler heads or valves costing $50 to $300. Seasonal services, such as spring start-up and fall winterization, generally range from $100 to $200. Installation costs for basic residential systems can start at $2,000 and go up for more complex setups.
Sprinkler System Prices in Pickering
Basic Maintenance Visit:
- Cost: $80 – $150
- Includes: Checking and adjusting sprays and rotors, power and volume adjustments, general system inspection.
Comprehensive System Check-Up:
- Cost: $90
- Includes: Labor for 30 minutes, adjustment of schedule, inspection of the whole system, installation of up to 5 new Rain Bird HE-VAN nozzles, replacement of up to 5 filters.
Repairs:
- Single Sprinkler Head Replacement: $50 – $150
- Valve Replacement: $100 – $300
Seasonal Services:
- Spring Start-Up: $100 – $200
- Fall Winterization: $100 – $200
Installation:
- Basic Residential Systems: $2,000 – $4,000
- Complex Systems for Larger Properties: $5,000 – $10,000+
Additional Services:
- Rain Sensor Installation: $50 – $150
- Controller Upgrades: $100 – $300
- Water-Saving Nozzle Installation: $50 – $150
Irrigation Sprinklers Service
Irrigation Sprinklers Service Near Me
Need sprinkler irrigation services close by that you can rely on? The expert team we have gives you solutions that are complete, including maintenance, repair, and installation of irrigation systems. Our range of services includes the following special ones as well, such as the spring start-up, fall winterization, and rain sensor and water-saving nozzles. We guarantee a thick and green lawn all seasons with the cheap yet competitive prices of our services, which span from $125 to $430. You can reach us today to enjoy local, high-quality service and have a perfect home irrigation system that is compatible with your personal tastes and budget.
Irrigation Sprinklers Service
Sprinkler System Service Near Me
Craving a partner sprinkler service in your area? To give the best but still meet the demand, our team has been carefully trained in sprinkler maintenance and installation. We sell services on a seasonal basis like spring startup and fall winterization; we are allowed to install a rain sensor or water-saving nozzle. Prices charged are between $125 to $430 so you can have the luxury of selecting the service at the most affordable rates. It doesn’t matter if your lawn is sparse or overgrown, we can force feed the acquisition, fertilize, and water the manual plant to bring your lawn back to life. And a certified technician of an automated irrigation system able to optimize the operational data of the system is delivered.
Irrigation Sprinklers Service
Irrigation System Service Near Me
Are you after reliable local irrigation system services? The staff we are working with, will cover a complete range of services such as maintenance, repairs, and installation of advanced irrigation systems. We bring services such as spring start-up and fall winterization, as well as one-time occasions such as the installation of rain sensors and water-friendly nozzles. Ranging from the low price of $125 to the high price of $430, we ensure that your lawn is still green and lush. For routine maintenance or a systematic overhaul, you are only a call for local, skilled, and affordable service that suits your needs.