How to blow out irrigation pipes
How To Blow Out Irrigation Pipes
Air-Blown Solution
How to blow out irrigation pipes
Do You Have An Irrigation System?
Protect It From Freezing!
Here’s Information How To Blow Out Irrigation Pipes
Here Are Steps How To Blow Out Irrigation Pipes
Turn off the water supply to your irrigation system. This is usually done at the main water valve.
Open all drain valves on your system, allowing any remaining water to flow out.
Attach the air hose from the compressor to your irrigation system’s blow-out port or fitting.
Gradually increase the air compressor’s pressure, starting at a low setting. Slowly increase until you reach the recommended pressure for your system (usually around 40-50 psi).
Begin with the zone farthest from the compressor. Turn on the irrigation controller to activate each zone for a short burst, allowing compressed air to clear out water from the pipes.
Work your way through each zone, moving closer to the compressor. Always ensure that only one zone is active at a time.
Once all zones are blown out, turn off the compressor and the irrigation controller.
Professional Assistance - How To Blow Out Irrigation Pipes
When it comes to how to blow out irrigation pipes, professional assistance is the prudent route if you’re uncertain about the process or lack the requisite equipment. Improper winterization can have far-reaching consequences, potentially leading to significant damage to your valuable irrigation infrastructure. By enlisting the expertise of professionals, you ensure a thorough and accurate winterization process that safeguards your system against the harsh impacts of freezing temperatures. Their in-depth understanding of the intricacies involved, coupled with their specialized tools, minimizes the risk of costly errors. Ultimately, investing in professional assistance not only provides you with peace of mind but also extends the longevity of your irrigation system, allowing it to perform optimally season after season.
Benefits of Blowing Out Pipes
Blowing out pipes efficiently removes water, safeguarding against freezing during winter.
By eliminating water, you prevent freeze-related damage to your irrigation system.
This simple process ensures your system remains intact, ready for the upcoming growing season.
Clear pipes mean your irrigation system is primed to deliver consistent performance.
Regular winterization prolongs the life of your irrigation infrastructure.
DIY Mistakes
DIY attempts might leave pockets of water in the system, leading to freeze-related damage.
Incorrectly adjusted air pressure can cause stress on pipes, fittings, and valves.
Mishandling air compressors or valves could result in expensive repairs.
Improper technique might lead to uneven water removal across zones, affecting system integrity.
Without professional knowledge, identifying and addressing potential issues becomes challenging.
How to blow out irrigation pipes
How to blow out irrigation pipes